Project: Sportsman   -  
            Listing of Entries
    (Please mouse-over any icon to get a description of that function).



Categories
  
Builder Name:Kyle Stone   -  
Project:   Glasair - Sportsman 2+2   -   VIEW REPORTS
Total Hours:1859.9
Start/Last Date:Jul 03, 2019 - Jun 30, 2022
Engine:Lycoming IO-390-EXP
Panel:Garmin G3X w/ GNX375 IFR nav, GNC 255 NAV/COM
 
Friendly URL: https://eaabuilderslog.org?s=Sportsman

Home or Last Project Picture

Dec 12, 2020     Step #107 + 108 - Run fuel lines from headers to shut off vlave - (4 hours)       Category: Systems (IX)
Worked on this off and on this week. Since I am using the Newton valve I have a few new issues. When I went to run the fuel line from the drain valve to the selector valve I found the Boost pump is not going to give enough clearance. Since I purchased the boost pump directly from GA I am guessing its the same as they use on the TWTT. I sent an email to GA engineering for clarification prior to engineering my own solution. Complete the RH fuel line routing from the header to the drain and the section directly after the drain. I'll have to wait to figure out next steps on boost pump prior to moving forward on my fuel lines:

Header - Drain = 35”
Drain - coupling = 38”
Coupling - Selector Valve = 39”???


 


NOTE: This information is strictly used for the EAA Builders Log project within the EAA organization.     -     Policy     -     © Copyright 2024 Brevard Web Pro, Inc.